·Cleanroom air exchange rate test

·Single air flow test in cleanroom

·Cleanliness testing

·Cleanroom airtightness test

·Air filter leakage test

·Temperature/humidity balance test

·Noise testing

·Microseismic testing

·Lighting test

·Anti static grounding test

·Conductivity test of interior materials

·Cleanroom recovery speed test

·Airflow organiz·ation balance test

·Confirmation of completion drawings and points

·Confirmation of Test Points/Height/Position

·Testing arrangement and confirmation

·The format of the test report the requirements

·Test project sequence and mutual confirmation

·Testing equipment, instruments, and calibration 

     reports shall be submitted for review by the owner       and engineering company  for confirmation

·The cleanroom conditioning system is completed 

     before testing and has been running continuously 

     for more than 24 hours

·During testing, it is necessary for the owner or 

    representative to conduct a joint inspection and 

     confirm the test results

·Before conducting measurements, all instruments         must be within the valid calibration period

·According to the specifications and design 

   requirements, understand the owner's requirement      and standards,and confirm

·The professional level of the testing personnel 

     needs to adapt to the needs and progress of the 

    owner's process

·C/R Test cleanroom testing and certification work 

    should adhere to an objective and attitude